Used 1978 Honda CB Used 750L

Seller Description

This bike was stripped down to the frame and during re-assembly I made numerous upgrades from bronze swing arm bushings all the way to an engine rebuild with heavy duty studs and high flow valves. When I got the bike, the mileage was around 15,000 and the engine was leaking oil out of the #1 exhaust header along with having a loud tick on that same cylinder. Now that it’s been rebuilt it’s very smooth running. I added a 90’s cbr rear wheel and brake to match the diameter of the front gsxr wheel that I used from the fork swap. The forks were rebuilt also because they were leaking and the steering bearings were replaced with tapered bearings. It has an electronic ignition and also has a new pamco ignition sitting in a box of extra parts. For the front fork conversion, I used a custom triple tree from cognitomoto which was $900 alone. I also just installed new leds, headlight and a trailtech electronic speedometer/tachometer. It comes with a “hondaman” hardcover manual that tells you everything you need to know to tune or rebuild it and also a Haynes type manual. For the bad...the “professional” paint job bubbled where the emblems used to be, I’m assuming it’s from bad prep work over the filler to cover the emblem mounts because it happened on both sides of the tank in the same area.

I’ve only ridden for short trips to make sure that everything is fine and it runs well and is fun to ride. I get stopped every time I ride it by people asking about the bike. Title is clear and it is listed on Syracuse NY Craigslist. Feel free to call or text with questions at 315-65 seven seven seven seven seven. I can send a video over the phone so it can be heard running or face time if needed. I’m relisting as an auction to hopefully increase interest, I’m assuming I’m going to take a big loss on this bike at this point with about $6,000 invested. The box of spares is worth over $500 alone and is prob approaching 1,000. Thanks for looking.
.