Seller Description

1990 Nissan 240SX SE. I have owned this car for approximately 3 years. It was 100% stock when I bought it in 2017. It has been in GA since new, so the car does not have any rust. It has been garage kept.The car has a clean GA title.I built this car to be a fun street car. I've taken it to several open track days and autocross events (some of the photos were taken at Talladega GP Raceway from a recent track day). Modifications include:
WALK AROUND VIDEO:https://www.youtube.com/watch?v=MHejQk1to2M
Engine5.7L LS6 Engine from a 2005 Cadillac CTS-VAll seals and other maintenance items were replaced when it was installedNew ACDelco starter and ACDelco alternatorMoroso front sump oil pan with GTO oil pickup tubeCable throttle body with oem throttle cableISR Performance motor mountsCustom air intakeOptima red top battery (replaced Jul-2020)Wiring Specialties Pro Series LSx Swap Harness with A/C provisions
Transmission & DrivetrainTremec T-56 6 Speed Manual Transmission, Triple/Double synchros with close ratios (2.66). Transmission was built in 2019 by Texas Drivetrain Performance. All clutch components were purchased new in 2019.MGW Short throw shifterC6 Z06 Flywheel and clutch kitF-body Camaro bellhousingWilwood universal clutch master cylinderChase bays clutch lines with remote bleederF-body Camaro slave cylinderISR CrossmemberEnergy suspension transmission mountThe Driveshaft Shop Custom 1-Piece Steel Driveshaft3.69 Ratio VLSD from an Infiniti Q45Infiniti J30 Axles
Cooling SystemMishimoto aluminum radiatorMishimoto dual electric fans with aluminum shroudMishimoto coolant adapter, with 1/8 NPT to -4AN adapter connecting to aHolley -4AN steam port hoseGKTech cooling panel
FuelWalbro 255lph fuel pump-6AN braided nylon AN hoseC5 Corvette fuel filter/regulator
OilSummit Racing remote oil filter mount, K&N Oil filter-10AN braided nylon AN hose for the feed and return lines
ExhaustISR Performance 304 Stainless 1-3/4” long tube headersHeaders were ceramic coated by Performance Coatings in Jonesboro, GAISR Performance 304 Stainless 3” Y-pipe3” Stainless exhaust
BrakingCadillac CTS-V Brembo 4-Piston front brake calipersStoptech braided stainless steel brake linesNissan 350Z Front rotors (Centric high carbon)Nissan 300ZX rear brake calipers and rotors (Centric high carbon)Nissan 300ZX brake master cylinderGKTech master cylinder stopperNissan 300ZX parking brake assembly with R33 cables and GKTech adapter plate.
Chassis & SuspensionGKTech front 5 lug conversion hubs with new OEM Nissan bearingsOEM Nissan 300ZX 5 lug rear hubs, purchased new from Z1 MotorsportsTein S-Tech springsKYB StrutsEnergy suspension polyurethane subframe bushings,steering rack bushings,rear control arm bushingsNew tie rodsSikky 32mm front sway barBraided stainless power steering lineMoroso power steering reservoirGKTech solid aluminum differential bushings
Wheels & TiresNissan 350Z 17” wheels, painted gloss blackBFGoodrich G-Force Sport Comp 2 tires 225/45 front 235/45 rear. The front tires have some uneven wear from track use so I will replace the front tires prior to selling the vehicle.
Interior & AudioAlpine radio with bluetoothGrant steering wheelInfinity front speakers, kicker rear speakersS14 240SX front seats
Body & Paint1991-94 front bumper with DorkiDori fender extensionsOEM 180SX turn signalsWing-less hatch from base model 240SXPainted Nissan Gun Metallic (Code KAD) with Axalta base and 3 coats of high solids clear.
Information about 1990 Nissan 240SX for sale on this page. See price and photos of the 240SX Nissan Gray SE LS6
When it was painted, the door, trunk, and sunroof jambs were all painted in addition to the engine bay.
Included with the sale is the original front seats, S14 rear seats to match the current front seats, air conditioning components, including the LS6 A/C compressor, S13 condenser, lines, evaporator, and the Wiring specialties add-on harness. You will have to purchase adapter lines/fittings to install A/C
The car does not have A/C or heat, however the components are all included with the sale of the car. The only thing you would need to purchase is the lines. I did add on the provisions for A/C when I had the wiring harness made.
In addition to the modifications listed above, the car also has a lot of new OEM parts (bearings, seals, etc.) Everything was done in the past 3 years so most of the parts have very little miles on them.
Please read condition description if you haven't done so already.
If you have any questions please ask PRIOR TO BIDDING
.