Cars and Motorcycles For Sale In Binghamton, New York, United States

1983 Honda CR

2005 Suzuki Gsxr

1984 Harley-Davidson Street

Details about 1991 Kawasaki KX

1991 Kawasaki KX

1981 Suzuki RM

2016 GENESIS COUPE 3.7 LITER V6 WITH ONLY 29,000 MILES. This is the last year that the Genesis Coupe was made. It will probably only go up in value. It has an 8 Speed Automatic Transmission, and all normal features.

1983 SUZUKI RM125 that has been bored to a 56mm piston and ported into a 134cc with full DG exhaust system. Flat slide Mikuni carb. Engine was all rebuilt with new bearings, seals, and gaskets. Engine has less than a hour of run time.

Super Rare 1981 Honda CR250R Mugen Kitted! The engine was all rebuilt, with OEM bearings and seals, and a NOS (New Old Stock: meaning new) Mugen kit was installed. Which included a complete top end and exhaust. The original Mugen box and all

1983 SUZUKI RM125 that has been bored to a 56mm piston and ported into a 134cc with full DG exhaust system. Flat slide Mikuni carb. Engine was all rebuilt with new bearings, seals, and gaskets. Engine has less than a hour of run time.

Rare 1988 Husqvarna/Cagiva WRK125. Engine has about 4 hours on it . Previous owner had it rebuilt with new crank and piston. Nice Ohlins rear shock. Almost new Excel rims with Dunlop tires. New Mika hand lebars and new ODI grips. Bike is in

1983 SUZUKI RM125 that has been bored to a 56mm piston and ported into a 134cc with full DG exhaust system. Flat slide Mikuni carb. Engine was all rebuilt with new bearings, seals, and gaskets. Engine has less than a hour of run time.

Restored 1981 Honda CR125R Elsinore Mugen Replica Engine rebuilt with new bearings, seals, gaskets and clutch. Standard size piston on fresh cylinder. Mikuni Flat Slide Carb. New sprockets, and chain. All rebuilt suspension to stock

Restored and rebuilt 1987 Honda CR250 Fully rebuilt engine with all new OEM Honda crank, and transmission bearings and seals. Rebuilt and balanced crank shaft with new rod. Replated cylinder done to stock bore with new piston and rings.

Restored and rebuilt 1983 Suzuki RM125.Engine rebuilt with a fresh top end that was bored and ported out to a 56mm bore making it 134cc. Flat slide Mikuni carb with full DG exhaust system. Suspension was all rebuilt to stock settings All new

Harley-Davidson Softail. 2000 Harley-Davidson Fatboy FLF 4,631 Miles Eagles Chrome Clean New White Walls. Condition is "Used".Brand new lettered white walls2-Locking Helmet holders on handle bars Right side locking

Restored 1981 Honda CR125R Elsinore Mugen Replica Engine rebuilt with new bearings, seals, gaskets and clutch. Standard size piston on fresh cylinder. Mikuni Flat Slide Carb. New sprockets, and chain. All rebuilt suspension to stock

1980 Honda CR125R Fox Moto Racer Full restoration and rebuild with zero run time on it. Engine was fully rebuilt, all new bearings, seals, and gaskets. Top end was done by Tom Morgan Racing with head and port work done. Bored out to a 57.50 mm.

2012 Ford Super Duty F-250 SRW LARIAT . Engine/Transmission in Excellent Condition, Interior/Exterior in Great Condition. *Only 73k Miles *6.7 Power Stroke B20 *Heated/Power Seats *Back Up Camera *SunRoof *BlueTooth & Much Much

Unrestored very low hour all original 1982 Suzuki RM125 The story on this bike is that: In 1982 this bike was won by a young kid as raffle prize winner at the 1982 Unidilla Motocross Nationals. A guy that was at the race bought it from the kid.

Very low hour all original 1982 Suzuki RM125 The story on this bike is that: In 1982 this bike was won by a young kid as raffle prize winner at the 1982 Unidilla Motocross Nationals. A guy that was at the race bought it from the kid. This guy raced

Rare 1987 Tresoldi MX80 these came with a Honda CR80 engine. These bikes were made in Italy. They are a bigger frame with 21inch front wheel, and 18 inch rear wheel. Lots of very trick parts including: WP 4054 Super Forks, Billet aluminum

Restored 1981 Honda Elsinore CR125 Engine was rebuilt. New bearings, seals, gaskets. Cylinder was done with new 56mm piston and rings. Stock OEM exhaust pipe and silencer. Frame was blasted and powder coated. Very straight with no dents

Completely rebuilt and restored 1979 Honda CR125 Elsinore. Everything has been done on this bike. Runs and looks better than new! It has a new 1980 CR125 seat foam with new 79 OEM seat cover. The tank is a RC replica tank made from fiberglass

Restored 1981 Honda Elsinore CR125 Engine was rebuilt. New bearings, seals, gaskets. Cylinder was done with new 56mm piston and rings. Stock OEM exhaust pipe and silencer. Frame was blasted and powder coated. Very straight with no dents

2020 KTM 150 XC-W TPI . Condition is Used only because it was sold! Bike has less than 15 minutes on it! Purchased new and added the following performance and cosmetic additions. FMF Ti silencer, Ohlins rear shock/spring, superspox

Restored 1981 Honda Elsinore CR125 Engine was rebuilt. New bearings, seals, gaskets. Cylinder was done with new 56mm piston and rings. Stock OEM exhaust pipe and silencer. Frame was blasted and powder coated. Very straight with no dents

Restored 1985 Kawasaki KX125. These are hard to find, and this one has a very rare TUF Racing natural "works" exhaust pipe. Everything has been rebuilt on this bike. Complete fresh engine, and suspension. Powder coated frame

Restored 1982 Honda CR80R Rebuilt engine with new top end, new crank bearings, seals, and gaskets. New gold rims with new spokes wrapped in new tires. Original plastic was polished. New OEM decals. New OEM seat cover installed. Please see

Restored 1982 Honda CR80R Rebuilt engine with new top end, new crank bearings, seals, and gaskets. New gold rims with new spokes wrapped in new tires. Original plastic was polished. New OEM decals. New OEM seat cover installed. Please see