Used Bultaco Motorcycles for sale in Australia, Second Hand

Bultaco Lobito 175cc, 1974 model, I purchased from an elderly gentleman who was restoring it, he was admitted to a nursing home. It should not need much to get going. I was advised the motor has been rebuilt. Engine and frame numbers match. Frame starts B Engine starts M.Located Central Coast NSW,

Bultaco Sherpa T 250 M91 1973 - beautiful bike, hard to part with!New Maxxis tyres, Betor shocks, Bultaco handle bars, grips, clutch and brake levers, exhaust pipe, forks, light switches, 6v regulator, bearings etc...too much to list.Rebuilt 250cc engine with black ceramic painted barrel,

Here we have a professional built 1971 Bultaco Pursang converted into a short track, speedway bike etcframe # B6807462Engine # M-10600508starts easily and runs well, have a look at the pictures, ask any questions, inspection welcomeWheels / tyres are 130/80 x 19a nicely made rear disc as well as

Hi original bultaco alpina 350matching numbers bike comes with Speedo exhaust previous guy said it run when stored Australia n delivered can help with freight

Hi original bultaco alpina 350matching numbers bike comes with Speedo exhaust previous guy said it run when stored Australia n delivered can help with freight

Here we have a great survivor, 1972 Bultaco Matador, SD ( six Day ) in very original conditionhas aftermarket guards, but overall very original and completeEngine and frame numbers matching PB10700321Starts runs and rides wellThe bike is as we received it, not restored or touched upPlease ask

Here we have a great survivor, 1972 Bultaco Matador, SD ( six Day ) in very original conditionhas aftermarket guards, but overall very original and completeEngine and frame numbers matching PB10700321Starts runs and rides wellThe bike is as we received it, not restored or touched upPlease ask

Bultaco Alpina 350

Vintage Bultaco m048 pursang.complete centre crankcase.big end renewed by D.Newell. ( no freeplay).new mains bearings installed.gears change smooth.kickstart ratchet click return very good.has all fasteners & washers.Threads, splines, taper, keyways VGC.

Up for bids is this seldom offered and very sought after classic 1974 Bultaco MK 7 250cc Pursang This is a matching number Model 120 Pursang. Motor PM-12001830 and Frame PB-12001880** The bike is neat and tidy and 100% eligible to compete in pre 75 competition and would suit a Dirt Tracker or VMX

Bultaco Sherpa T 350 (manufactured between 1972 - 1974)Matching engine and frame numbers.Bike starts, runs and rides as expected. All gears/clutch work.Ideal project for a restorer. Has been stored for 4 years. I purchased it as a running project but haven't got around to it...Some obvious

Bultaco Sherpa T350M92 1973 Matching numbersVin JB9203445 Eng JM9203445 Ground up, nut and bolt restoration of matching numbers Sherpa T350. Fully rebuilt including; Motor and gearbox professionally rebuilt replacing piston, rings, gudgeon and all bearings, seals and O rings, clutch and

Bultaco Sherpa T 350, restored to beautiful condition. Lots of new and refurbished parts, engine starts and runs and idles perfect. Bike is nostalgic to ride, so much torque, and a unique sound, not been off road since restoration, was a museum piece on display for years, now fully commissioned to

Bultaco Matador 250, fully restored to museum standard. Lots of new parts direct from Spain, engine has rebore, new pistons and rings, starts and runs and idles perfect. Bike is nostalgic to ride, and that unique Bultaco sound, not been off road since restoration, was a museum piece on display for

Here we have a great survivor, 1972 Bultaco Matador, SD ( six Day ) in very original conditionhas aftermarket guards, but overall very original and completeStarts runs and rides wellThe bike is as we received it, not restored or touched upPlease ask any questions, inspection welcomeph

LOBITO 175 NEW TOP END PISTON ,RINGS,ETC NON ORIGINAL TANK NO KICKSTARTER CAN BE VIEWED AT URRAWEEN HERVEY BAY QLD ALSO HAVE A 250 1978 SHERPA T $1800 AND 250 ALPINA 1974 $2000 CALL 0419405969

bultaco alpina 250, matching number this bike has been in my bar for some years , i have started it , no noises or rattle etc. has been turn over ,not started for a while, should not be a problem. can be viewed a Urraween Hervey Bay QLD. PHONE for more info . no texts will not answer, no scammers .

1979 Bultaco Sherpa T 250, 198A model, matching engine and frame numbers, complete bike engine turns over has new bore with new Mahle piston. I have never tried to start the bike in the time i have had it. What you see is what you get, has compliance plate if you want to register. If you require any

bultaco alpina 250, matching number this bike has been in my bar for some years , i have started it , no noises or rattle etc. has been turn over ,not started for a while, should not be a problem. can be viewed a Urraween Hervey Bay QLD. PHONE for more info . no texts will not answer, no scammers .

SHERPA T 250 , MATCHING NUMBERS, PROJECT BIKE. ,THIS BIKE HAS BEEN IN MY BAR FOR SOME TIME , HAS NOT BEEN STARTED DOES HAVE SPARK AND COMPRESION SHOULD START THE FUEL TANK NEEDS TO BE REPLACED IT WILL NOT HOLD FUEL HENCE I HAVE NOT HAD IT RUNNING CAN BE VIEWED AT URRAWEEN HERVEY BAY QLD WILL NOT ANSWER

bultaco alpina 250, matching number this bike has been in my bar for some years , i have started it , no noises or rattle etc. has been turn over ,not started for a while, should not be a problem. can be viewed a Urraween Hervey Bay QLD. PHONE for more info . no texts will not answer, no scammers .

1979 Bultaco Sherpa T 250, 198A model, matching engine and frame numbers, complete bike engine turns over has new bore with new Mahle piston. I have never tried to start the bike in the time i have had it. What you see is what you get, has compliance plate if you want to register. If you require any

1979 Bultaco Sherpa T 250, 198A model, matching engine and frame numbers, complete bike engine turns over has new bore with new Mahle piston. I have never tried to start the bike in the time i have had it. What you see is what you get, has compliance plate if you want to register. If you require any

BULTACO X 3 SOLD AS A JOB LOT, 1974 ALPINA 250, SEAT BASE ONLY,, 78 SHERPA T 250 TANK IS UN USEABLE WILL NEED TO BE REPLACED, 73? LOBITO 175 NEW TOP END PISTON, RINGS, ETC, NON ORIGINAL TANK (SUZUKI) NO KICK STARTER.. CAN BE VIEWED AT URRAWWEN HERVEY BAY QLD. CONTACT TO BE MADE WITHIN 24 HOURS OF

BULTACO X 3 SOLD AS A JOB LOT, 1974 ALPINA 250, SEAT BASE ONLY,, 78 SHERPA T 250 TANK IS UN USEABLE WILL NEED TO BE REPLACED, 73? LOBITO 175 NEW TOP END PISTON, RINGS, ETC, NON ORIGINAL TANK (SUZUKI) NO KICK STARTER.. CAN BE VIEWED AT URRAWWEN HERVEY BAY QLD. CONTACT TO BE MADE WITHIN 24 HOURS OF

BULTACO 75 SD MATADOR 2 OWNERHEAPS OF BRAND NEW OLD STOCK PARTS FROM SPAINHAVE NOT STARTED FOR 3 YEARS , BUT SHOULD JUST NEEDFRESH FUEL. INSPECTIONS INVITED, ITEM IS LOCATED IN WOODS POINTVICTORIA SOUTH OF MANSFIELD. PHONE 0357778245

Bultaco Alpina.Approx 1972. M85, one of the best looking Apinas.Motor is very good,gear box very good. Matching engine and frame numbers.Ready for restoration,easy project. Bike is in Mildura.

Bultaco Alpina.Approx 1972. M85, one of the best looking Apinas.Motor is very good,gear box very good. Matching engine and frame numbers.Ready for restoration,easy project. Bike is in Mildura.

1973 Bultaco Matador SD MKVCARBORETOR MISSING from bikeIthas been sitting in shed for over 20 years and still kicks over number matching motor and frame and includes original tool kit LOCATED IN HERVEY BAY CASH ON PICK UPDELIVERY NOT AVAIABLE